SV8890 Silicone Tsarin Gilashin Gilashin Ƙaƙwalwar Kaya Biyu
Bayanin Samfura
SIFFOFI
1. Babu shakka
2. Daidaitacce lokacin aiki
3. Kyakkyawan mannewa ga mafi yawan kayan gini
4. High bonding ƙarfi da modules
5. 25% iya motsi
6. Silicone karko
KYAUTA
Bangaren A(Tsaki): 190L, Bangaren B (Mai ƙaranci) :19L
Bangaren A (Gidan): 270kg, Bangaren B (Mai haɓakawa): 20kg
AMFANIN GASKIYA
SV8890 Pu sealant an tsara shi don hatimin yanayi da aikace-aikacen hatimin kewaye na gilashin rufewa.
LAunuka
SV8890 yana samuwa a cikin baki, launin toka, fari da sauran launuka na musamman.
ALKUR'ANI MAI GIRMA
Ba a yi nufin waɗannan ƙimar don amfani ba wajen shirya takamaiman bayanai
| Gwajin aikin | Naúrar | Daraja |
| Gudun gudu, sagging ko kwarara a tsaye | mm | 0 |
| Lokacin aiki | min | 20 |
| Lokacin bushewa (25 ℃, 50% RH) | min | 40-60 |
| Durometer Hardness | Shore A | 20-60 |
| A 23 ℃ matsakaicin ƙarfin ƙarfin ƙarfi elongation | % | ≥ 100 |
| Ƙarfin ƙarfi (23 ℃) | Mpa | 0.9 |
| Ƙarfin ƙarfi (90 ℃) | Mpa | 0.68 |
| Ƙarfin ƙarfi (-30 ℃) | Mpa | 0.68 |
| Ƙarfin ƙarfin ƙarfi ( ambaliya) | Mpa | 0.68 |
| Ƙarfin ƙarfi (ambaliya - ultraviolet) | Mpa | 0.68 |
| Yankin lalacewa na Bond | % | 5 |
| Thermal tsufa (Thermal nauyi asara) | % | ≤5 |
| Thermal tsufa (crack) | No | |
| Thermal tsufa (efflorescence) | No |
Bayanin Samfura
LOKACIN MAGANCE
Kamar yadda aka fallasa zuwa iska, SV8890 ya fara warkewa a ciki daga saman. Lokacin da aka ba shi kyauta yana kusan minti 50; cikakken mannewa mafi kyau duka ya dogara da zurfin sealant.
BAYANI
An ƙera SV8890 don saduwa ko ma wuce abubuwan da ake buƙata na:
Ƙididdigar ƙasar Sin GB/T 14683-2003 20HM
ARZIKI DA RAYUWAR SHELF
Ya kamata a adana SV8890 a ko ƙasa da 27 ℃ a cikin kwantena na asali waɗanda ba a buɗe ba. Yana da tsawon rayuwar watanni 12 daga ranar da aka yi.
YADDA AKE AMFANI
Shirye-shiryen Sama
Tsaftace duk haɗin gwiwa yana cire duk wani abu na waje da gurɓata kamar mai, maiko, ƙura, ruwa, sanyi, tsofaffin maƙala, dattin ƙasa, ko mahadi masu ƙyalli da kayan kariya.
Hanyar aikace-aikace
Wuraren rufe fuska kusa da haɗin gwiwa don tabbatar da ingantattun layukan rufewa. Aiwatar da SV8890 a ci gaba da aiki ta amfani da bindigogi. Kafin fata ta ɓullo, kayan aiki mai matsi tare da matsi mai haske don yada abin rufewa a kan saman haɗin gwiwa. Cire tef ɗin abin rufe fuska da zaran an sa kayan ado.
HIDIMAR FASAHA
Cikakken bayanan fasaha da wallafe-wallafe, gwajin mannewa, da gwajin dacewa suna samuwa daga Siway.
BAYANIN TSIRA
SV8890 samfuri ne na sinadarai, ba abinci ba, ba a dasa shi cikin jiki kuma yakamata a nisantar da yara.
● Za a iya amfani da robar silicone da aka warke ba tare da wani haɗari ga lafiya ba.
● Ya kamata idan ba a warke ba tare da siliki na siliki tare da idanu, kurkura sosai da ruwa sannan a nemi magani idan haushi ya ci gaba.
● Ka guji bayyanar da fata na tsawon lokaci zuwa silinda ba a warkewa ba.
● Kyakkyawan samun iska yana da mahimmanci don aiki da wuraren warkewa.
RA'AYI
Bayanin da aka gabatar a nan ana bayar da shi cikin gaskiya kuma an yi imani daidai ne. Koyaya, saboda yanayi da hanyoyin amfani da samfuranmu sun fi ƙarfin ikonmu, bai kamata a yi amfani da wannan bayanin a madadin gwajin abokin ciniki don tabbatar da cewa samfuranmu suna da aminci, inganci, kuma masu gamsarwa ga takamaiman aikace-aikace.
