SV-900 MS Polymer High-elasticity Sealant Manna

Matakan kariya:

1. Shiri na Fuskar:
   • Dole ne saman ƙasa ya kasance mai tsabta, bushe, kuma babu mai da mai.
   • Dangane da saman, ana iya buƙatar gogewa (ƙara) ko amfani da na'urar share fage/mai haɓaka don tabbatar da mannewa mai kyau.
2. Wakilan Sakin Mold:
   • Ana amfani da sinadaran fitar da mold na waje akai-akai a masana'antar filastik. Dole ne a cire waɗannan sinadaran sosai kafin a haɗa su ko a rufe su.
3. Bukatar Gwaji:
   • Saboda bambancin abubuwan da aka yi amfani da su wajen fenti (musamman maƙallan foda) da kuma nau'ikan abubuwan da aka yi amfani da su, gwaji ya zama dole kafin amfani.
   • Dole ne a gwada musamman robobi da saman da aka shafa.
4. Fashewar Damuwa (PMMA & Polycarbonate):
   • Haɗawa ko rufe PMMA (acrylic) da polycarbonate na iya haifar da tsagewar datti a ƙarƙashin matsin lamba. Gwaji yana da mahimmanci kafin amfani da shi a cikin waɗannan aikace-aikacen.
5. Substrates marasa mannewa:
   • Babu mannewa ga polyethylene (PE), polypropylene (PP), ko polytetrafluoroethylene (PTFE).
6. Ba a Gwada Substrate bas:
   • Ya kamata a yi gwaji ga ƙananan abubuwa waɗanda ba a ambata a sama ba.

Aikace-aikace (Amfani):

1. Rarrabawa:
   • Yi amfani da bindigar ɗaurewa da hannu ko bindigar da ke amfani da iska don rarrabawa daga harsashi (fakitin tsiran alade mai tauri) ko tsiran alade na foil (fakitin laushi).
   • Lokacin amfani da iska mai matsewa, ana buƙatar matsin lamba daga 0.2 zuwa 0.6 MPa.
2. Zafin Kayan Aiki:
   • Ƙananan zafin jiki na rufewa yana ƙara danko, yana rage yawan fitarwa.
   • A guji wannan ta hanyar dumama mannewar zuwa zafin ɗaki kafin a raba.
3. Hawan Gyara:
   • Ƙarayanayin zafi da danshi na yanayi zai ƙara yawan waraka.

Tsaftacewa:

1. Maƙallin rufewa mara warkewa:
   • Ana iya gogewa ta amfani da sinadarai masu ƙarfi kamar barasa.
2. Maganin rufe fuska da aka warke:
   • Yana buƙatar cirewa ta jiki ta amfani da kayan aiki kamar gogewa ko wuka.