SV9900 Mai Hana Silinda Mai Sauri Biyu
Siffofi:
--Bangare biyu, alkoxy, maganin tsaka tsaki, ba ya lalatazuwa ƙarfe, gilashi mai rufi, siminti da marmara.
-- Tsarin warkarwa mara lalata.
--Babu wani wari mara daɗi yayin warkewa.
--Kyakkyawan iyawar yanayi da juriya ga hasken ultraviolet, zafi da danshi, ozone da matsanancin zafin jiki.
--Yana ci gaba da sassauƙa a cikin zafin jiki na -58 ºF (-50℃) zuwa 302 ºF (150℃) Kyakkyawan jituwa da sauran manne na silicone masu tsaka tsaki.
Launuka:
Sashe na A (Tushe): Fari; Sashe na B (Mai Katalin): Baƙi; Bayan Gauraye: Baƙi.
Kunshin:
Sashe na A (Tushe): 185mL
Sashe na B (Mai ƙara kuzari): 185mL
Abun da aka haɗa:
Sashe biyu, maganin tsaka-tsaki
Ruwan silicone na RTV
Aikace-aikace
Haɗin gini da hatimin gilashi, bangon labulen aluminum, hasken gilashiaikin rufin da tsarin ƙarfe.
Ƙofofin gida masu motsi, faranti na porcelain, faranti na ado, da sauransu, suna buƙatar gaggawahatimin haɗin warkarwa.
A fannin gina na'urar ɗaukar hoto, haɗa kai cikin sauri da kuma rufe sassan ƙarfe na ɗaukar hoto.
Halayen yau da kullun
| Kadara | Sakamako | Hanyar gwaji |
| Tushe-Kamar yadda aka bayar | ||
| Launi | Fari | |
| Siffar Jiki | Manna | |
| Takamaiman Nauyi | 1.38g/cm³ | ASTM D1475 |
| Mai Haɗawa - Kamar yadda aka bayar | ||
| Launi | Baƙi | |
| Siffar Jiki | Manna mai kauri | |
| Takamaiman Nauyi | 1.38g/cm³ | ASTM D1475 |
| Kamar yadda aka ƙera | ||
| Launi | Baƙi | |
| Takamaiman Nauyi | 1.38 g/cm³ | ASTM D1475 |
| Lokacin Kayan Aiki (23℃ / 73°F, 50% RH) | Minti 10-20 | |
| Lokacin ɗaukar hoto (23℃ / 73°F, 50%RH) | Minti 20-70 | |
| Gudawa, Sag, ko Slump | ≤0.1mm | ASTM C639 |
| Rabon Haɗawa (Ta girman) | A:B=1:1 | |
| Ba da shawarar rabon gauraya (Da girma) | A:B=1:1 | |
| Abubuwan da ke cikin VoC | ≤40g/L | |
| Kamar yadda aka warke - Bayan kwana 21 a zafin jiki na 23℃ (73°F) da 50%RH | ||
| Taurin Durometer, Bakin Teku A | 40 | ASTM C661 |
| Ƙarfin Tashin Hankali na Ƙarshe | 1.1MPa | ASTM C1135 |
| Ƙarshen Ƙarshe | 1.5 | ASTM C1135 |
| Ƙarfin Yagewa, Die B | 8kN/m | ASTM D624 |
Ajiya da tsawon lokacin shiryayye:
Watanni 6 daga ranar ƙera su idan aka adana su a ko ƙasa da 27ºC (80ºF) a cikin ainihin kwantena da ba a buɗe ba.
Iyakancewar Samfuri:
Bai kamata a yi amfani da wannan samfurin ba:
--A aikace-aikacen gilashin gine-gine, sai dai idan SHANGHAI SIWAY BUILDING MATERIAL CO., LTD. ta sake duba zane-zanen shagon don dacewa kuma ta yi aikiGwaje-gwajen mannewa da dacewa akan abubuwan da aka yi amfani da su a cikin aikin, kayan spacer da duk kayan haɗin da ke tare da su. Ana yin bita da gwaji akan aiki-da-aikin-da-aikintushe. SHANGHAI SIWAY BUILDING MATERIAL CO.,LTD. ba ta bayar da izinin rufewa ba don aikace-aikacen gilashin tsari. Jagororin masana'antar gilashin gini (ASTM)C1401) ya ba da shawarar cewa dukkan ɓangarorin da ke da hannu a cikin ƙera tsarin SSG da kuma kowane aikin gini dole ne su sake duba zane da cikakkun bayanai.
-- Ga kayan gini da ke zubar da mai, masu amfani da robobi ko kuma masu narkewa - kayan aiki kamar suitace da aka dasa, ƙusoshin da aka yi da mai, ko kuma kaset ɗin roba ko kuma waɗanda aka yi da ganyen kore ko kuma waɗanda aka yi da ɗan ƙaramin abu
-- Lokacin da zafin saman ƙasa da 10ºC (50ºF) ko ya wuce 40ºC (104ºF)
-- Inda ake buƙatar fenti na mai rufewa, domin fim ɗin fenti na iya fashewa da barewa
-- A cikin aikace-aikacen ƙasa da matakin Don amfani azaman tsarin rufewa na ciki na hana gobara
-- A cikin gidajen da ke kwance a ƙasa inda ake iya fuskantar gogewa da cin zarafi na jiki
-- Zuwa saman da ke cike da sanyi ko danshi
-- Don mannewa a kan karafa marasa siffa ko saman da ke fuskantar tsatsa (misali, aluminum ɗin niƙa, ƙarfe mara siffa, da sauransu)
-- Don hulɗa da acid mai ƙarfi ko tushe
-- ...
-- Don ci gaba da nutsewa cikin ruwa
-- Don aikace-aikacen nutsewa cikin ruwa
Kada a shafa manne-manne na silicone mai warkar da acid (Acetoxy) a wannan samfurin domin wannan na iya haifar da asarar mannewar manne na SS658 Silicone Structural Sealant a kan gilashi ko wasu abubuwan da aka yi amfani da su.a cikin tsarin.
